К списку форумов К списку тем
Регистрация    Правила    Главная форума    Поиск   
Имя: Пароль:
Рекомендовать в новости

запрограммировать smart ключ toyota

Гость
0 - 27.10.2012 - 12:35
Где в городе такое делают?


1 - 27.10.2012 - 13:07
в ниссановский сервис не ездил? чё там говорят?
Гость
2 - 27.10.2012 - 13:08
toyota в ниссановский центр.....?
3 - 27.10.2012 - 13:18
странно что в сабже ничего не смутило...
4 - 27.10.2012 - 13:20
наркоманы?
Гость
5 - 27.10.2012 - 13:28
дилерский софт не катит - нужно предварительно стереть старые данные и программировать чистый. Иммобилайзер запрограммировал, а открывание с пульта - нет
6 - 27.10.2012 - 15:16
Тойота какого года, что за модель?
Открой тайну.
7 - 27.10.2012 - 15:22
ТО ЕСТЬ ТАК ТЫ ДЕЛАЛ?
И НЕ ПРОКАТИЛО?

System operation
With keyless entry system
Alarm/central locking can be deactivated in hands-free mode:
Approach vehicle with remote control, grip driver's or passenger's door handle: Unlocks vehicle and deactivates
alarm.
Approach vehicle with remote control, press release button on tailgate: Unlocks vehicle and deactivates alarm.
Alarm/central locking can be activated in hands-free mode:
Switch ignition OFF.
Ensure doors and tailgate are closed.
Press lock button on driver's or passenger's door handle to lock the vehicle and activate the alarm.
There is an emergency key inserted in the remote control.
All models
Pressing lock button Fig. 1 [1] activates alarm and central locking.
Pressing unlock button Fig. 1 [2] deactivates alarm and central locking.
Vehicles with double locking:
Pressing lock button Fig. 1 [1] again within 5 seconds of locking vehicle activates double locking system.
Pressing unlock button Fig. 1 [2] deactivates alarm and double locking system.
If vehicle unlocked and doors not opened within 30 seconds, locks/alarm are reactivated.
NOTE: Alarm/central locking functions can be altered.
Fig. 1
Programming
When
Remote control added or replaced.
System malfunction.
How
Driver's door open and remote control removed from ignition slot.
Within 5 seconds:
Insert and remove the remote control from the ignition slot twice.
Within 40 seconds:
Close and open driver's door twice.
Insert and remove the remote control from the ignition slot.
Close and open driver's door twice.
Insert the remote control into the ignition slot and close the driver's door.
Within 40 seconds:
NOTE: DO NOT depress brake pedal whilst carrying out the following operation.
Press POWER button to switch ignition ON (amber LED illuminated) and OFF once to program a remote control code
whilst retaining the original codes or twice to program a remote control code whilst erasing the original codes.
Remove remote control from ignition slot.

Within 5 seconds:
System should now lock and unlock vehicle, once or twice depending which mode has been selected.
Carry out the following button procedure within 40 seconds:
Simultaneously press and hold remote control lock Fig. 1 [1] and unlock Fig. 1 [2] buttons.
Within 3 seconds:
Press remote control lock Fig. 1 [1] or unlock Fig. 1 [2] button.
Within 5 seconds:
System should now lock and unlock vehicle.
NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button
procedure.
If required repeat button procedure to program remaining remote controls.
NOTE: To exit programming mode: Open driver's door.
Remote controls can also be programmed using diagnostic equipment.
NOTE: Without keyless entry system: A maximum of 4 keys can be programmed.
With keyless entry system: A maximum of 5 keys can be programmed.
Гость
8 - 27.10.2012 - 15:26
NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button
procedure. - вот тут все останавливается. Родным ключиком делает 1 раз, тем что пытаюсь запрограммировать - 2.
9 - 27.10.2012 - 15:35
masterr_
"ЗАДУМАЛСЯ"
Гость
10 - 28.10.2012 - 17:10
9-kawi >при попытке запрограммировать через программу toyota techstream - первый ключ опять же подтверждает, а который надо перешить - на него вообще нет реакции. При попытке запрограммировать Кнопочками хоть ошибку выдает. А тут ноль реакции. Я понял существуют аппаратные программаторы, которые дублируют ключи, стирают и т.д. Вот нужно таким. Или есть другой способ. Модели ключей одинаковые, если снять крышку.
11 - 29.10.2012 - 10:05
masterr_
Не могу без его разрешения выдать номерок трубы чела, который скорее всего решил бы твой вопрос.
12 - 29.10.2012 - 10:08
Но, если он(вопрос) стоит кардинальным образом, или как тут некоторые недоучки пишут, КООРДИНАЛЬНЫМ образом :-), то попытаемся посодействовать.
:-)
BIA
13 - 29.10.2012 - 10:13
кави.ты бананы умеешь дозаривать??
14 - 29.10.2012 - 10:16
BIA
Не вкурил, о чем ты базлаешь?
Гость
15 - 31.10.2012 - 09:09
Цитата:
Сообщение от kawi Посмотреть сообщение
Но, если он(вопрос) стоит кардинальным образом, или как тут некоторые недоучки пишут, КООРДИНАЛЬНЫМ образом :-), то попытаемся посодействовать.
Ну просто как бы запасной ключ нужен, иммо и железный ключ есть - т.е. в случае чего открыть машину и поехать получится. А все таки хотелось бы чтобы все работало как задумано - открытие дверей автоматом , с пульта и т.д.


К списку вопросов






Copyright ©, Все права защищены